Voltmeter
Keywords
analyzer, electrical, node, bidirectional
Ports
| Name | Type |
|---|---|
| port 1 | Electrical Node |
| port 2 | Electrical Node |
| output | Electrical Signal |
Properties
General Properties
| Name | Default value | Default unit | Range |
|---|---|---|---|
name Defines the name of the element. |
Voltmeter | - | - |
annotate Defines whether or not to display annotations on the schematic editor. |
true | - | [true, false] |
enabled Defines whether or not the element is enabled. |
true | - | [true, false] |
type Defines the element unique type (read only). |
Voltmeter | - | - |
description A brief description of the elements functionality. |
Voltmeter | - | - |
prefix Defines the element name prefix. |
VM | - | - |
model Defines the element model name. |
- | - | - |
library Defines the element location or source in the library (custom or design kit). |
- | - | - |
local path Defines the local path or working folder $LOCAL for the element. |
- | - | - |
url An optional URL address pointing to the element online help. |
- | - | - |
Standard Properties
| Name | Default value | Default unit | Range |
|---|---|---|---|
configuration Defines the voltmeter configuration. |
dual port | - | [single port, dual port |
====================================
Implementation Details
The element s-parameters matrix is defined depending on the property ‘configuration’. If the ‘configuration’ property is set to ‘single port’, the relationships between the ‘Electrical Node’ and ‘Electrical Signal’ ports are defined as:
$$\begin{bmatrix} b_1 \\ V\end{bmatrix}=\begin{bmatrix} 1\\ 2\sqrt{R_0}\end{bmatrix} [a_1]$$
Where \(a_1\) is the incoming wave and \(b_1\) is the outgoing wave at the element port ‘port’. The output voltage \(V\) is defined at the port ‘output. \(R_0\) is the internal characteristic impedance. Relationship between the electrical waves, current and voltage are defined by the following equations:
$$a_i(f)=\frac{1}{2}(\frac{V_i(f)}{\sqrt{R_0}} + \sqrt{R_0}\cdot I_i(f))$$
$$b_i(f)=\frac{1}{2}(\frac{V_i(f)}{\sqrt{R_0}} - \sqrt{R_0}\cdot I_i(f))$$
Where \(a_i(f)\) is the incoming wave, \(b_i(f)\) is the outgoing wave, \(V_i(f)\) is the voltage and \(I_i(f)\) is the current at port \(i\).
If the ‘configuration’ property is set to ‘dual port’, the relationships between the ‘Electrical Node’ and ‘Electrical Signal’ ports are defined as:
$$\begin{bmatrix} b_1 \\ b_2 \\ V \end{bmatrix} = \begin{bmatrix}1& 0 \\ 0 & 1 \\ 2\sqrt{R_0} & -2\sqrt{R_0} \end{bmatrix} \begin{bmatrix} a_1 \\a_2 \end{bmatrix}$$
Where \(a_1\) is the incoming wave and \(b_1\) is the outgoing wave at the element port ‘port 1’, and \(a_2\) is the incoming wave and \(b_2\) is the outgoing wave at the element port ‘port 2’.