wg_parameterized straight data file

matrix

B x 1 matrix with the wavelengths (m) for which the properties below are evaluated, where B is the number of wavelengths. For best results, use three points per band. 

Example: [1260e-9, 1310e-9, 1360e-9, 1530e-9, 1550e-9, 1625e-9] for O-band (1260-1360nm) and C-band (1530-1565nm).

W x 1 matrix with the waveguide widths (m) for which the properties below are evaluated, where W is the number of width values.

T x 1 matrix with the temperatures (K) for which the properties below are evaluated, where T is the number of temperature values.

Note: For models with no temperature dependence, provide a single temperature value.

Cell

M x 1 cell array where M is the number of modes. Each element of the cell is a struct with fields:

• name: string with the name of the mode ('TE' or 'TM')
• ID: integer to identify the mode, which must be 1 for 'TE' and 2 for 'TM'. These should be consistent across the entire CML.

Notes:

• This model only supports one or two modes
• The modes in mode_data should correspond to the modes in neff, ng, D, and loss

Matrix

B x W x T x M matrix with effective index as a function of wavelength, waveguide width, waveguide temperature, and mode number, respectively.

Example: neff(1, 3, 5, 2) stores the effective index for the first frequency band, the third waveguide width value, the fifth provided temperature value, and the second mode.

B x W x T x M matrix with group index as a function of wavelength, waveguide width, waveguide temperature, and mode number, respectively.

Note: For more information on mode properties, see Mode Properties in photonic model page.

B x W x T x M matrix with dispersion (s/m/m) as a function of wavelength, waveguide width, waveguide temperature, and mode number, respectively.

Note: For more information on mode properties, see Mode Properties in photonic model page.

B x W x T x M matrix with loss (dB/m) as a function of wavelength, waveguide width, waveguide temperature, and mode number, respectively.

Note: This is only for length-dependent loss, do not include mode mismatch losses at the ports of the waveguide.

Number

Default waveguide width (m)

Note: This is visible to the end user.

Minimum waveguide width (m)

Maximum waveguide width (m)

Default waveguide length(m)

Note: This is visible to the end user.

Minimum waveguide length(m)

Minimum waveguide length (m)