| Variable | Type | Description |
|---|---|---|
|
Operating_Wavelength |
Number |
Center wavelength for QA tests. |
| BW_bias |
Bias for electrical bandwidth test (MZM only). |
|
| BW_qa_type |
Flag to define the type of QA for electrical bandwidth test. The options are: 1 = impulse response 2 = RF frequency sweep |
|
| thermal_BW_bias (if applicable) |
The bias voltage (positive) of the thermal switch for thermal bandwidth test |
|
|
Thermal_BW_tolerance (if applicable) |
The relative tolerance for QA tests which verify the different figures of merit of the thermo-optic switch. If the simulated values differ from the values provided within the data file by more than this tolerance, the QA tests will fail. | |
|
Vpi_electrical_tolerance (MZM only) |
The relative tolerance for QA tests which verify the different figures of merit of the Mach-Zehnder modulator. If the simulated values differ from the values provided within the data file by more than this tolerance, the QA tests will fail. | |
|
Ppi_thermal_tolerance |
||
|
notch_wavelength_tolerance |
||
|
IL_rel_tolerance |
||
|
FSR_tolerance |
||
|
ER_tolerance |
||
|
BW_tolerance |
||
|
dneff_dT_tolerance |