Adds an Eigenmode Expansion (EME) solver region to the MODE simulation environment.
|
Syntax |
Description |
|---|---|
|
addeme; |
Add an EME solver region to the simulation environment. This function does not return any data. |
Example
The following script command will add an EME solver region, set its dimension and other properties, and run the simulation. The script assumes that the simulation environment already has the geometry set up.
addeme;
# set dimension
set("x min",-8e-6);
set("y",0);
set("y span",5.5e-6);
set("z",0.5e-6);
set("z span",7e-6);
# set cell properties
set("number of cell groups",3);
set("group spans",[3e-6; 10e-6; 3e-6]);
set("cells",[1; 19; 1]);
set("subcell method",[0; 1; 0]); # 0 = none, 1 = CVCS
# set up ports: port 1
select("EME::Ports::port_1");
set("use full simulation span",1);
set("y",0);
set("y span",5.5e-6);
set("z",0);
set("z span",7e-6);
set("mode selection","fundamental mode");
# set up ports: port 2
select("EME::Ports::port_2");
set("use full simulation span",1);
set("y",0);
set("y span",5.5e-6);
set("z",0);
set("z span",7e-6);
set("mode selection","fundamental mode");
run;
See Also
List of commands , select , run , addvarfdtd , addfde