Field | Type | Description |
---|---|---|
parameters |
struct with fields described in parameters table |
Parameter values used for setting up the QA test bench. |
low_3dB_bandwidth (optional)
|
boolean |
Set this flag to true for bandwidths that are less than ~1 MHz. |
relative_tolerances |
struct |
The relative tolerance for QA tests which verify the different figures of merit of the phase shifter. If the simulated values differ from the values provided within the data file by more than this tolerance, the QA tests will fail. This struct accepts relative tolerance values as numbers for following FOMs:
|
parameters
Field | Type | Description |
---|---|---|
wavelength | number |
The center wavelength for QA tests. |
BW_bias
|
number |
Bias for electrical bandwidth test. Note: BW_bias is typically set at half Vpi of the phase shifter with default length. |