Field | Type | Description |
---|---|---|
parameters |
struct with fields described in parameters table |
Parameter values used for setting up the QA test bench. |
BW_qa_type |
boolean |
Flag to define the type of QA for electrical bandwidth test. The options are: 1 = impulse response 2 = RF frequency sweep Note: This should only provided for a model with electrical tuner. |
relative_tolerances |
struct |
The relative tolerance for QA tests which verify the different figures of merit of the mach_zehnder modulator. If the simulated values differ from the values provided within the data file by more than this tolerance, the QA tests will fail. This struct accepts relative tolerance values as numbers for following FOMs:
|
parameters
Field | Type | Description |
---|---|---|
wavelength | number |
The center wavelength for QA tests. |
BW_bias
|
number |
Bias for electrical bandwidth test. Note: This should only provided for a model with electrical tuner. |
thermal_BW_bias
|
number |
The bias voltage (positive) of the thermal switch for thermal bandwidth test. Note: This should only provided for a model with thermal tuner. |