Field | Type | Description |
---|---|---|
parameters |
struct with the fields described in parameters table |
Parameter values used for setting up the QA test bench. |
BW_qa_type |
number |
Flag to define the type of QA for electrical bandwidth test. The options are: 1 = impulse response 2 = RF frequency sweep Note: The field should only be provided for a model with electrical tuner. |
relative_tolerances |
struct |
The relative tolerances for QA tests which verify the different figures of merit of the Mach_Zehnder modulator. If the simulated values differ from the values provided in the data file by more than these tolerance, the QA tests will fail. This struct accepts relative tolerance values as numbers for the following FOMs:
|
parameters
Field | Type | Description |
---|---|---|
wavelength | number |
The center wavelength for QA tests. |
BW_bias
|
number |
The bias bandwidth for electrical bandwidth test. Note: This parameter should only be provided for a model with electrical tuner. |
thermal_BW_bias
|
number |
The bias voltage (positive) of the thermal switch for thermal bandwidth test. Note: This parameter should only be provided for a model with thermal tuner. |