Field | Type | Description |
---|---|---|
temperature | struct with the fields described in the table below |
The temperature at which the model operates. Note:
|
radius
|
The radius (m) of the ring modulator |
|
coupling_gap_drop
|
The drop port coupling gap (m) of the ring modulator. Note: This parameter is required only for double-bus rings. |
|
coupling_gap_through
|
The through port coupling gap (m) of the ring modulator |
|
coupling_length
|
The coupling length (m) of the ring modulator |
|
junction_fill_factor
|
Fraction of the ring (m/m) which contains electrical phase shifter waveguide given by \(f = L_{eo}/2\pi r\), where \(L_{eo}\) is the total length of the electro-optic phase shifter within the ring. Note: This parameter is not required for ring resonators/filters. |
|
high_loss_waveguide_fill_factor
|
Fraction of the ring (m/m) which contains doped waveguide given by \(f = L_{d}/2\pi r\), where \(L_{d}\) is the total length of the doped region within the ring. Note: This parameter is not required for ring resonators/filters. |
|
thermal_fill_factor
|
Fraction of the ring (m/m) for which contains thermal phase shifter waveguide given by \(f = L_{to}/2\pi r\), where \(L_{to}\) is the total length of the thermo-optic phase shifter within the ring. |