Variable | Type | Description |
---|---|---|
test_radius |
Matrix |
Radius values for all tests provided as a 1xN matrix where N is the number of values provided. |
test_Lc |
Coupling length values for all tests provided as a 1xN matrix where N is the number of values provided. |
|
test_coupling_gap_through |
Coupling gap values of bus 1 (in and through ports) for all tests provided as a 1xN matrix where N is the number of values provided. |
|
test_coupling_gap_drop |
Coupling gap values of bus 2 (drop and add ports) for all tests provided as a 1xN matrix where N is the number of values provided. [[Note]] For single bus rings this parameter is not required. |
|
sample_rate | Number
|
Sample rate for time domain tests (restricted by the minimum requirement for the device). |
BW_bias_thermal |
Bias for thermal bandwidth test. Used for Verilog-A QA only. Note: For a ring without thermal tuner, this parameter should not be provided. |
|
BW_bias |
Bias for electrical bandwidth test. Note: For a ring without electrical modulation, this parameter should not be provided. |
|
imp_amplitude |
Amplitude of the impulse in the electrical bandwidth test. Note: For a ring without electrical modulation, this parameter should not be provided. |
|
resonant_wavelength_rel_tolerance |
Number |
The relative tolerance for QA tests which verify the different figures of merit of the ring modulator. If the simulated values differ from the values provided within the data file by more than this tolerance, the QA tests will fail. Note: For a ring without electrical modulation, mod_eff_rel_tolerance and electrical_bandwidth_rel_tolerance should not be provided. Note: For a ring without thermal tuner, mod_eff_thermal_rel_tolerance and thermal_bandwidth_rel_tolerance should not be provided.
|
Q_rel_tolerance |
||
FSR_rel_tolerance |
||
IL_rel_tolerance |
||
IL_drop_rel_tolerance |
||
ER_rel_tolerance |
||
mod_eff_thermal_rel_tolerance |
||
dneff_dT_rel_tolerance |
||
thermal_bandwidth_rel_tolerance |
||
mod_eff_rel_tolerance |
||
electrical_bandwidth_rel_tolerance |
||
thermal_bandwidth_rel_tolerance |