Snippet - cml port table

A cell array containing structs which have information about each port. Every struct must contain the following fields:

• name: The name of the port, which will be visible to the end user. This name should be consistent with the name that will be used for netlisting.
• dir: The directionality of the port, either "Input", "Output", or "Bidirectional"
• type: The signal type of the port, which should be "Optical Signal" for waveguides
• pos: The side of the model which the port will be displayed on, either "Left", "Right", "Top", or "Bottom"
• loc: The placement of the port on the side defined by loc, provided as a coordinate between 0 and 1.

opt_1_RELAY

opt_2_RELAY

ele_th_1_RELAY

ele_th_2_RELAY

ele_th_3_RELAY

The indices of the cells in the "ports" cell array, that corresponds to the contacts of the "bottom-arm" thermal tuner.

ele_th_4_RELAY

ele_cat_1_RELAY

The indices of the cells in the "ports" cell array, that corresponds to the electrical cathode and anode of the "top-arm".

ele_an_1_RELAY

ele_cat_2_RELAY

The indices of the cells in the "ports" cell array, that corresponds to the electrical cathode and anode of the "bottom-arm". 

ele_an_2_RELAY

ele_cat_term_1_RELAY

The index of the cell in the "ports" cell array, that corresponds to the "top-arm" cathode termination port.

ele_an_term_RELAY

The index of the cell in the "ports" cell array, that corresponds to the common anode termination port.